You Have A Problem With Error 016-506

In this guide, we’re going to find out some of the potential causes that might be causing the 016-506 error, and then we’ll suggest possible solutions that you can try to fix the problem.

PC problems? Solve them in minutes.

  • Step 1: Download ASR Pro and install it on your computer
  • Step 2: Launch the program and click "Scan" to start the scanning process
  • Step 3: Click "Repair" to fix any detected issues
  • Keep your PC safe and secure with this free

    error 016-506

    © 1986-2021 Xerox Corporation All rights reserved. Xerox® is a trademark of Xerox Corporation in the United States and / or other countries.


    Contents Of The Article


    Article Properties


    Matching Product

    Date of last publication
    Version
    Element type

    Symptoms

    1. Turn off the printer and then turn it back on.
      1. Turn off the printer.
      2. Wait 10 seconds.

        Printer

      3. is turning on.
      4. If

      5. determines that the problem persists.
    2. Check communication with the printer.
      The IP address of the printer is required to check communication with the printer manufacturer from the computer. If possible, select commandthe first line is the ping command.
    3. Determine the printer is probably connected (ping succeeded).
    • The printer is not connected to a group: look for “Communicate with printer on time. Error.
    • The ping was correct and the printer is using a wired :
    • network connection

    1. Enable network scanning from the control panel.
      1. When the printer is ready (LCD displays Copy, Scan, Fax), press the down arrow button until Scan is displayed.
        Then really click the checkmark button.
      2. Click the icon until Scan Network is displayed.
        The options in the Scan Network To submenu are displayed.
      3. Press the right button until Server is displayed and then press the checkmark button.
      4. Press the left or right button to display Yes, and then press the checkmark button.
    2. Make sure the Network Port of the Embedded Web Server (EWS) is set to Wired.
      1. Open a web browser.
      2. Enter the IP address of the printer and click Go. (Opens on B-page of the printer report).
      3. In the directory on the left, click the Printer Settings Web site.
      4. Click the

      5. tab Printer Settings.
      6. Click most of the links for digitizing standards.
      7. Change the default setting of the network port as a whole to wired.
      8. Click “Restart Printer” to apply the new settings.
    3. Register a user who will migrate the embedded web server.
      1. Open the surfer.
      2. Enter the IP address of your printer and click OK.
      3. To connect specific printers on the page to the Internet, click Address Book in the appropriate menu on the left.
      4. Default username: admin
      5. Password for non-payment: (no, write blank)
      6. Click OK to open the sort workbook.
      7. Click the tablet with the server address, then click the first available create button that hasn’t been launched.
      8. In the address form for server registration, enter a name based on the registration record.
      9. Select the most important server typera.
      10. Usually they enter the IP address of the computer or server to which our scan will be sent.
      11. Enter the server port number for each server to which the scan was sent.
    • Enter a connection name to indicate the shared computer or the path to the host server if the system requires resources to send scans.
    • Select the Enable password check box and enter the server login code for the computer. If it turns out that the system needs data to send our scan.
    • Enter the name of the shared folder in the Share Name or Path Server field.
    • Click Apply Settings Again to update the printer’s address book.
    • A

    • Create a shared folder.
      Find or create a folder on your computer where families want to send their surveyed images. An example of folder names is MyShare, and make sure write permission is enabled.
    • Scan the file and upload the result to the new network.
    • On the 3115cn control panel, press the down arrow button until Is set to “Scan” and then press the checkmark button.
    • Press the down arrow until Scan to Network is displayed, just press the left or right arrow to select Server or Computer, and then check the box.
    • In the list of saved person names, click the up or down arrow to view the selection, and then tap edit selection to confirm the selection.
    • Click the “Start” button to actually start scanning and send the file to the specified Share, path on your network.
    • If the problem persists, please contact technical support.
    • The ping was found to be correct and the printer received a wireless network connection:
    1. Make sure the network port of the Embedded Web Server (EWS) is properly configured for wireless communication.
      1. Open the Internet in a good browser.
      2. Enter the IP address of the printer and click Start. (The printer web page opens on your computer.)
      3. Click the Unidirectional Printer Settings link on the left side of the assembly.
      4. Click Click the My Printer Settings tab.
      5. Click the Digitization Standards link.
      6. Change the network port to standard wireless.
      7. Click Restart Printer to apply the latest settings.
    2. Register a user for the Embedded Web Server.
      1. Open a web browser.
      2. Enter the IP address of the printer and click Go.
      3. On the web printer page, click the Address Book link in the left menu.
      4. Default username: admin
      5. Normal password: (no, trust)
      6. Click OK to open the instruction manual.
      7. Click Public Server Address, then on the tab, locate the first available, unused New button.
      8. In the server address registration form, find your login name.
      9. Select the server type.
      10. Enter the IP address of the computer or server to which the scanned image will be sent.
      11. Enter the server port number for the computer and server to which the scan is likely to be sent.

      • Enter the connection name for the shared computer or your path, the server, if the system orders data, to which the analysis will also be sent.
      • Select the Enable password checkbox and enter the password to connect to the computer server and specify whether the system requires the data with which the scanned image will be sent.
      • Enter the title of the share in the share name or server path.
      • Click Apply Settings Again to change the printer’s address book.
      • Create a shared folder.
        Find or create a folder on your computer to send your scanned drawings. An example folder header is MyShare, and make sure write permission is enabled.
      • Scan the file and send it over the network.
      • On the 3115cn control panel, press the down arrow until Scan Without Questions is displayed, and then press the checkmark.
      • Press the down arrow button until Scan to Network is displayed, then press the Point Left or Right button to select Servep “or” Computer “, and click the” Select “button.
      • In the list of registered names, Culture Media, press the up or down arrow button to display the selection, and then press the checkmark button to confirm the selection.
      • Click the start button to start scanning and create a file at the specified location or network path.
      • If the problem still persists, contact technical support.

      Rate this product


      Thanks for the comments.

      PC problems? Solve them in minutes.

      Do you have a computer problem? Youre not alone. In fact, over 60% of computers suffer from some kind of error or crash at one point in time. ASR Pro is the best solution for fixing these problems and getting your PC back up to speed. Click here to get started:

    3. Step 1: Download ASR Pro and install it on your computer
    4. Step 2: Launch the program and click "Scan" to start the scanning process
    5. Step 3: Click "Repair" to fix any detected issues

    6. Sorry, our comment computer is not working right now. Please try again later.

      Comments cannot contain any of these special characters: () n

      Keep your PC safe and secure with this free

      Error 016 506
      Erro 016 506
      Blad 016 506
      Errore 016 506
      Erreur 016 506
      Fehler 016 506
      Oshibka 016 506
      Fout 016 506

    Posts created 303

    Related Posts

    Begin typing your search term above and press enter to search. Press ESC to cancel.

    Back To Top