PC problems? Solve them in minutes.
Step 1: Download ASR Pro and install it on your computer
Step 2: Launch the program and click "Scan" to start the scanning process
Step 3: Click "Repair" to fix any detected issues
Keep your PC safe and secure with this free
Sometimes your computer may generate an error code indicating that am_path_sdl was not found in the library. There can be several reasons for this error to appear.
During automatic reconfiguration, I get the following warning:
configure.ac:58: Warning: macro 'AM_PATH_SDL'.
Later appears as an error in ./configure:
= 1.2.10 probably not found.” “$LINENO” 5)'”>
./configure: ray 5134: Syntax error near `1 token.2.10,'./configure: split 5134: `AM_PATH_SDL(1.2., 10, entry as_fn_error ? "*** SDL version >= 1.2.10, but not found." 5)'
In Debian “$lineno” based communities (Ubuntu, Debian, Raspbian) this can be done like this:
$ sudo apt get libsdl1.2-dev$ autoreconf -vif$ ./config
After successfully building this library, I was able to implement ldd and apt-file to get a list of Debian packages containing the required development dependencies:
PC problems? Solve them in minutes.
Do you have a computer problem? Youre not alone. In fact, over 60% of computers suffer from some kind of error or crash at one point in time. ASR Pro is the best solution for fixing these problems and getting your PC back up to speed. Click here to get started:
Step 1: Download ASR Pro and install it on your computer
Step 2: Launch the program and click "Scan" to start the scanning process
Step 3: Click "Repair" to fix any detected issues

libselinux1-devlibasound2-devlibsyncns-devlibcaca-devlibdbus1.0-cil-devlibflac-devlibgcrypt11-devlibghc-bzlib-devlibghc-libxml-sax-devlibgpg-error-devlibjson-c-devliblzma-devlibncursesw5-devlibogg-devlibpcre2-devlibpulse-devlibsdl1.2-devlibslang2-devlibsndfile1-devlibsystemd-devlibtinfo-devlibvorbis-devlibwrap0-devlibxau-devlibxcb1-devlibxdmcp-devlibxext-dev
This will probably also install the dependency runtime aArchive for . If you normally need runtimes, cut out the ‘-dev’ part.
Additionally (if this is only someone’s first build) for a working system you need:
Relevant line for lazy people:
sudo install build-essential autoconf libselinux1-dev libasound2-dev libasyncns-dev libcaca-dev libdbus1.0-cil-dev libflac-dev libgcrypt11-dev libghc-bzlib-dev libghc-libxml-sax -dev libgpg-error-dev libjson-c-dev liblzma-dev libncursesw5-dev libogg-dev libpcre2-dev libsdl1 libpulse-dev.2-dev libslang2-dev libsndfile1-dev libsystemd-dev libvorbis-dev libtinfo-dev libwrap0-dev libxau-dev libxcb1-dev libxdmcp-dev libxext-dev
configure.ac:58: Warning: macro 'AM_PATH_SDL'
./configure: Section 5134: Syntax error near `1 token.2.10,'./configure: Set 5134: `AM_PATH_SDL(1.2., 10, as_fn_error RR? "***SDL version >= 1.2.10 found successfully." "$LINENO" 5)'
$ sudo prepared libsdl1 install.2-dev$ autoreconf -vif$ ./customize
libselinux1-devlibasound2-devlibsyncns-devlibcaca-devlibdbus1.0-cil-devlibflac-devlibgcrypt11-devlibghc-bzlib-devlibghc-libxml-sax-devlibgpg-error-devlibjson-c-devliblzma-devlibncursesw5-devlibogg-devlibpcre2-devlibpulse-devlibsdl1.2-devlibslang2-devlibsndfile1-devlibsystemd-devlibtinfo-devlibvorbis-devlibwrap0-devlibxau-devlibxcb1-devlibxdmcp-devlibxext-dev
sudo apt organize autoconf build-essential libselinux1-dev libasound2-dev libasyncns-dev libcaca-dev libdbus1.0-cil-dev libflac-dev libgcrypt11-dev libghc-bzlib-dev libghc-libxml-sax-dev -devlibxcb1-dev libxdmcp-dev libxext-dev
Hello everyone,
After a long time I tried to set up adonthell and/or got hurt
Since this says a lot about the SDL, I think it really has to do with the move
FIXED automatic tools improve when no SDL 2 is generated in the system
I look forward to hearing from you. I don’t know if this is planned or
–
Shirish Agarwal†to wash in ¥ ¥ à à à à k-k ¥ ¥ ä¤ °k¤µk¤¾k¤²
My in insurance quote, this writing is licensed under CC 3.0
http://creativecommons.org/licenses/by-nc/3.0/
http://river Experiences. wordpress.com
065C 6D79 A68C E7EA 52B3 8D70 950D 53FB 729A 8B17
ShirishFebruary 16, 2012, ¤¶at¤¿at¤°at¥€at¤<***@gmail.com>:
This is the macro specified in sdl2.m4 and is located at
is not present in the product, you will get this error despite the configuration
This is a macro provided by SDL 1.2 and if you encounter this error
means that SDL 1.2 will also not compile correctly. Without SDL 1.2

After making sure SDL 1.2 is installed, find sdl.m4. This
Nowhere, but if found, you may need to install the packagework
for SDL. If it’s somewhere other than the main default, aclocal
All these alocal things are still a mystery to me.
What a great way to make sure people don’t run into problems like this
especially for extra programming like SDL crystal? OTON, with
You don’t have to run autogen.sh. But for people who work directly
Contributed by Shirish
After a very long time I tried to set up adonthell and couldn’t
this post is just weird
Contributed by Shirish
below :-
Checking the command to be able to parse /usr/bin/nm -B output from the gcc object… ok
Check if (/usr/bin/ld linker -m elf_x86_64) ld is GNU…yes
–
Shirish Agarwal†in the wash in ¥ ¥ à à à à k-k ¥ ¥ ä¤ °à¤µà¤¾à¤²
Quotes from me in the current license CC 3.0
Contributed by Kai Sterker
Well, yes, it’s okay, but it doesn’t always have to hurt. Do with

You don’t have SDL 2, I’d say the macro providing sdl2.m4
is missing. But itIf this is the only missing element, you must report it
Message from- shirish äöä ä °Ã ¥ €Ã ¤ ·
Keep your PC safe and secure with this free
라이브러리에서 Am Path Sdl을 찾을 수 없습니다
Am Path Sdl Nao Encontrado Na Biblioteca
Am Path Sdl Ne Najden V Biblioteke
Am Path Sdl Non Trovato Nella Libreria
Am Path Sdl Niet Gevonden In Bibliotheek
Am Path Sdl No Encontrado En La Biblioteca
Nie Znaleziono Am Path Sdl W Bibliotece
Am Path Sdl Nicht In Bibliothek Gefunden
Am Path Sdl Introuvable Dans La Bibliotheque